IP-Schnittstelle IPS/S + ETS3 vorhanden: Tabletsteuerung möglich?

Hi Pierre,
To control KNX devices (lighting, blinds, heating, etc.) from a tablet or smartphone, you should purchase a visualization server that will be able to import group addresses from the ETS3 project in CSV, XML or OPC Server (.esf) format.

You can export group addresses from the ETS3 project in two ways.

The first way is to export group addresses to CSV (Comma Separated Value) or XML (XML file) format. It all depends on what format your visualization server supports, CSV or XML. During export, first select the format (CSV or XML), then select Separator (Tab or Comma or Semicolon) and export to a file with the extension *.csv or *.xml
File -> Extract Data (e.g. OPC)... -> Export to CSV/XML

The second way is to export group addresses to OPC Server format.
In this case, the group addresses will be exported to an EIB session files (.esf).
File -> Extract Data (e.g. OPC)... -> Export to OPC Server

In most visualization servers, you can import group addresses directly from an ETS5 or ETS6 project file with the extension *.knxproj, but unfortunately the ETS3 project is saved to an ETS3.0f Project File (*.pr5), which means that you will not be able to use all visualization servers.

In your case, you can use the Gira Homeserver visualization server.

https://partner.gira.com/en/systeme/knx-system/knx-produkte/server/homeserver.html#cms-anchor-3588 

You can create a visualization in the HS Experte 4.12 software. You can import group addresses from an ETS3 project to the Gira Homeserver in either OPC Server (.esf) or XML (.hshml) format

You can choose between the QuadConfig visualization or a visualization that supports HTML5.

Gira Homeserver is one of the most stable visualization servers with the option of creating your own warning, fault and alarm archives.

You use the Gira S1 module for remote connection.

https://partner.gira.com/en/systeme/knx-system/knx-produkte/systemgeraete/s1.html#cms-anchor-15473 

Best regards, Paweł Dwornik