upgrade old installation ets3 to ets5
I have bought a house with a knx installation, 12 years old, originally configured with ets3, about 70 devices configured in 2 lines. To access the system and to add functionality I will need to establish control over the system probably by introducing ets5. Few questions:
1. will ets5 be able to configure also legacy KNX parts. Mine are 12 years old
2. would ets5 be able to read device settings from all of the devices connected by 'scanning' the system
Hope you can help!
Did you manage to resolve your problems?2
Yes, all is well. Thank you for your response-1
Hello, What was the solution please to this? Save me posting from new.
I have a similar situation and wondering if KNX Inside migt be a better solution for a single site?
1. will ets5 or INside an option to configure?
2. would ets5 or inside be able to read device settings from all of the devices?
Do you already have the configuration in ets3?
If so it can easily be converted.
Or do you have an existing KNX installation with no project files?2
I have a similar problem above i have a property with Siemens equipment which looks like it around 2005 to 2008 so vd 1 ets 3 etc
i am a ets 5 user and am struggling to get this equipment to communicate through ets5 and help would be greatly appreciated as i would really like to re use and re configure these devices
When im in programming mode it wont load or unload PLEASE HELP :)1
HI Charles Omar, I have the database file. Do I need to convert that over before loading onto ETS5?
ps - sorry for the delay, I didn't realise you had replied.0
Hi Mark Newland
Did you manage to convert the file?
hi ,i have old project file need to be upgrade ets50
Πραγματοποιήστε είσοδο για να αφήσετε ένα σχόλιο.