Blinds Actuator (D2-v24)

• blinds position are stored at 'power down'
  • exception: after using the 'clear all device settings' feature from the 'Devices / Topology' view
• 8 channels
• 8 objects per channel
  1. Move
  2. Step/Stop
  3. Position
  4. Info Position
  5. Feedback object, i.e. it sends information to the bus
  6. Storm Alarm
     • moves the blinds up after the alarm has been triggered (*)
     • the channel (blinds) cannot not be controlled via the other objects as long the alarm is triggered
  7. Rain Alarm
     • moves the blinds down after the alarm has been triggered (*)
     • the channel (blinds) cannot not be controlled via the other objects as long the alarm is triggered
  8. Intrusion Alarm
     • while the alarm is triggered: moves the blinds between
       • the positions 0% and 12% if not combined with Rain Alarm (*)
       • the positions 88% and 100% if combined with Rain Alarm (*)
     • the channel (blinds) cannot not be controlled via the other objects as long the alarm is triggered
  9. Fire Alarm
     • moves the blinds up after the alarm has been triggered (*)
     • the channel (blinds) cannot not be controlled via the other objects as long the alarm is triggered
• triggered alarms are indicated in the channel labels, as:
  • 'F' in case of fire
  • 'I' in case of intrusion
  • 'W' in case of storm (wind)
  • 'R' in case of rain
  • 'I+W': in case of intrusion + storm (wind) combined
  • 'I+R': in case of intrusion + rain combined
• 1 parameters per channel
  • alarm priority: defines the priority of the rain alarm
    • fire > intrusion > storm > rain
    • fire > intrusion > rain > storm
• device commission parameter (master reset), i.e. an 'application download' affects either:
  • the objects values of all channels
  • the object values of one specific channel
  • none of the object values

(*) : this depends on the alarm priority, see parameters