Binary Input Module (D11-v23) – KNX Association

Device descriptions

Binary Input Module (D11-v23)

Christophe Parthoens

input status of all channels is stored at 'power down'
- exception: after using the 'clear all device settings' feature from the 'Devices / Topology' view
8 channels
All channels represent normal open contacts
- Object value = 0 -> contact is open
- Object value = 1 -> contact is closed
2 objects per channel
- Binary Input - Normal Open
- Enable/Disable Binary Input
2 parameters per channel
- 0 -> 1 transitions :
  - Don't send
  - Send once
  - Repeat every 3 seconds
  - Repeat every 10 seconds
- 0 -> 1 transitions :
  - Don't send
  - Send once
  - Repeat every 3 seconds
  - Repeat every 10 seconds
- Coloring
  - The background color of the up/down control is in case of 'don't send' set to white
  - The background color of the up/down control is in all other cases set to orange