Couplers

The Couplers view has the same purpose as the Base view but is extended with coupler specific aspects, it contains the following controls:

• The KliX (D4) push buttons (2 x 8)
• The lamps (8) connected to the Switching Actuator (D7)
• The dimmable lamps (8) connected to the Dimming Actuator (D0)
• The blinds (8) connected to the Blinds Actuator (D2)
• The TP/TP coupler (D5) in order to view its settings:
  • P: how telegrams are transferred from the primary side to the secondary
    • the LED indicates a transferred telegram when lit
  • S: how telegrams are transferred from the secondary side to the primary
    • the LED indicates a transferred telegram when lit
• The IP/TP coulpler (D19) in order to view its settings:
  • P: how telegrams are transferred from the primary side to the secondary
    • the LED indicates a transferred telegram when lit
  • S: how telegrams are transferred from the secondary side to the primary
    • the LED indicates a transferred telegram when lit

The device labels in this view indicate to which side of the TP/TP coupler (D5) the device is connected: i.e. either 'D5.primary' or 'D5.secondary'.

In this view also the following devices can be used, i.e. they can influence the building functions within this view, but the actual device is not visible:

• The Logic Module (D14)
• The Scene Module (D13)