Authorization failure when trying to re-program a Somfy AS 315
I'm trying to re-program that Somfy weather station but it alway fails (log below). Once (many years ago) I had it programmed via a serial adapter and it still works a charm. Trying to alter a few parameters but to no avail. I have one line (just my house) where I now utilize an IP router. No issues programming other devices, only that Somfy. Their technical support wasn't that helpful so I try here.
log:
| # | Time | Service | Flags | Prio | Source Address | Source Name | Destination Address | Destination Name | Type | Info |
| 1 | 4/29/2024 12:46:55.407 PM | Recording was started, Host=THOMASKILIA491E, Connection=IP Tunneling, Mode=LinkLayer | ||||||||
| 2 | 4/29/2024 12:47:00.275 PM | from bus | Low | 1.1.35 | AS 315 N Kombisensor | 6/1/1 | Zeit | GroupValue_Write | 2C 2F 00 | Mon 12:47:00 | |
| 3 | 4/29/2024 12:47:00.282 PM | from bus | Low | 1.1.35 | AS 315 N Kombisensor | 6/1/0 | Datum | GroupValue_Write | 1D 04 18 | 1D0418 | |
| 4 | 4/29/2024 12:47:25.555 PM | from bus | Low | 1.1.72 | Room controller 3 Flur | 8/1/2 | Flur | GroupValue_Write | 07 F8 | 20.4 | |
| 5 | 4/29/2024 12:47:26.759 PM | to bus | System | 1.1.251 | KNX / EIB IP Interface | 1.1.35 | AS 315 N Kombisensor | T_Connect | ||
| 6 | 4/29/2024 12:47:26.788 PM | to bus | System | 1.1.251 | KNX / EIB IP Interface | 1.1.35 | AS 315 N Kombisensor | DeviceDescriptor_Read (S=0) | DescriptorType=0 | |
| 7 | 4/29/2024 12:47:26.817 PM | from bus | Low | 1.1.35 | AS 315 N Kombisensor | 1.1.251 | KNX / EIB IP Interface | T_ACK (S=0) | ||
| 8 | 4/29/2024 12:47:26.861 PM | from bus | Low | 1.1.35 | AS 315 N Kombisensor | 1.1.251 | KNX / EIB IP Interface | DeviceDescriptor_Response (S=0) | DescriptorType=0, DescriptorData=00 21 | |
| 9 | 4/29/2024 12:47:26.885 PM | to bus | System | 1.1.251 | KNX / EIB IP Interface | 1.1.35 | AS 315 N Kombisensor | T_ACK (S=0) | ||
| 10 | 4/29/2024 12:47:26.922 PM | to bus | System | 1.1.251 | KNX / EIB IP Interface | 1.1.35 | AS 315 N Kombisensor | PropertyValue_Read (S=1) | ObjectIndex=0, PropertyId=56, Count=1, StartIndex=1 | |
| 11 | 4/29/2024 12:47:26.952 PM | from bus | Low | 1.1.35 | AS 315 N Kombisensor | 1.1.251 | KNX / EIB IP Interface | T_ACK (S=1) | ||
| 12 | 4/29/2024 12:47:27.004 PM | from bus | Low | 1.1.35 | AS 315 N Kombisensor | 1.1.251 | KNX / EIB IP Interface | PropertyValue_Response (S=1) | ObjectIndex=0, PropertyId=56, Count=0, StartIndex=1, Data= | |
| 13 | 4/29/2024 12:47:27.028 PM | to bus | System | 1.1.251 | KNX / EIB IP Interface | 1.1.35 | AS 315 N Kombisensor | T_ACK (S=1) | ||
| 14 | 4/29/2024 12:47:27.061 PM | to bus | System | 1.1.251 | KNX / EIB IP Interface | 1.1.35 | AS 315 N Kombisensor | Memory_Read (S=2) | Count=1, Address=$0115 | |
| 15 | 4/29/2024 12:47:27.091 PM | from bus | Low | 1.1.35 | AS 315 N Kombisensor | 1.1.251 | KNX / EIB IP Interface | T_ACK (S=2) | ||
| 16 | 4/29/2024 12:47:27.139 PM | from bus | Low | 1.1.35 | AS 315 N Kombisensor | 1.1.251 | KNX / EIB IP Interface | Memory_Response (S=2) | Count=1, Address=$0115, Data=$FE | |
| 17 | 4/29/2024 12:47:27.165 PM | to bus | System | 1.1.251 | KNX / EIB IP Interface | 1.1.35 | AS 315 N Kombisensor | T_ACK (S=2) | ||
| 18 | 4/29/2024 12:47:27.209 PM | to bus | System | 1.1.251 | KNX / EIB IP Interface | 1.1.35 | AS 315 N Kombisensor | Authorize_Request (S=3) | 00 FF FF FF FF | |
| 19 | 4/29/2024 12:47:27.239 PM | from bus | Low | 1.1.35 | AS 315 N Kombisensor | 1.1.251 | KNX / EIB IP Interface | T_ACK (S=3) | ||
| 20 | 4/29/2024 12:47:32.289 PM | to bus | System | 1.1.251 | KNX / EIB IP Interface | 1.1.35 | AS 315 N Kombisensor | T_Disconnect | ||
| 21 | 4/29/2024 12:47:45.929 PM | Recording was stopped |
0
Commenti
0 commenti
Accedi per aggiungere un commento.