Group monitor - Coloring unknown source address
Hi
In group monitor, when the source of a telegram is the second tunnel of an IP Interface (which is configured in the ETS project), the telegram is grey (unknown source).
I think this is incorrect.
Also with a line scan, ETS shows the individual address of the tunnel (local) as unknown.
The diagnostic tools don't count with the extra individual addresses of an IP Interface.
Kind regards
-
Make sure you're using the latest application programs for your IP interfaces. All IP interfaces nowadays let you specify additional individual addresses within the ETS topology itself (and thus ETS 'knows' what device they belong to).
0 -
Hi Duncan
Yes, that's exactly my point.
I use an ETS application which shows the additional addresses, but in the monitor and in the line scan, ETS shows them as 'unknown'.ETS indeed 'knows' that the addresses are used by that IP Interface, but shows it incorrect in diagnostic.
0 -
ETS5? If so, I would double check your product file or something. Works fine for me as shown in screenshot below.
0 -
Hi Duncan
I asked the manufacturer of my interface to check it.
What about line scan?
0 -
Good there too 👍
0
Opmerkingen
5 opmerkingen
U moet u aanmelden om een opmerking te plaatsen.