Ana içeriğe geç

Ara

Community Basics

LED Überlast/Kurzschluss

Yorumlar

1 yorum

Yorum yazmak için lütfen oturum açın.

  • Jaap Hogetoorn

    looks as if there is a short cuircuit on the knx bus
    -disconnect all knx wires from power supply (PS), and press reset on the PS, still uberlast? PS defect, replace
    -reconnect the wires one by one until the wires with short cuircuit are found
    -repair shorted installation part

    (ask a local installer)

    0