The software simulates 5 rooms:
Room1 (R1)
- Contains device D4 - KliX
- Its heat exchanger unit (D17) is connected to channel 1 of the the heat controller (D16)
Room21 (R21)
- Contains device D21 - RoomControls
- Its heat exchanger unit is connected to channel 2 of the the heat controller (D16)
- Its shutter is connected to channel 1 of the blinds actuator (D2)
- The 2 ('regular') lamps are connected to channel 1 + 2 of the switching actuator (D7)
- The 2 dimmable lamps are connected to channel 1 + 2 of the dimming actuator (D0)
- Its presence detector is connected to channel 1 of the movement/presence detector (D10)
- The window contact is connected to channel 1 of the binary input module (D11)
Room22 (R22)
- Contains device D22 - RoomControls
- Its heat exchanger unit is connected to channel 3 of the the heat controller (D16)
- Its shutter is connected to channel 2 of the blinds actuator (D2)
- The 2 ('regular') lamps are connected to channel 3 + 4 of the switching actuator (D7)
- The 2 dimmable lamps are connected to channel 3 + 4 of the dimming actuator (D0)
- Its presence detector is connected to channel 2 of the movement/presence detector (D10)
- The window contact is connected to channel 2 of the binary input module (D11)
Room23 (R23)
- Contains device D23 - RoomControls
- Its heat exchanger unit is connected to channel 4 of the the heat controller (D16)
- Its shutter is connected to channel 3 of the blinds actuator (D2)
- The 2 ('regular') lamps are connected to channel 5 + 6 of the switching actuator (D7)
- The 2 dimmable lamps are connected to channel 5 + 6 of the dimming actuator (D0)
- Its presence detector is connected to channel 3 of the movement/presence detector (D10)
- The window contact is connected to channel 2 of the binary input module (D11)
Room24 (R24)
- Contains device D24 - RoomControls
- Its heat exchanger unit is connected to channel 5 of the the heat controller (D16)
- Its shutter is connected to channel 4 of the blinds actuator (D2)
- The 2 ('regular') lamps are connected to channel 7 + 8 of the switching actuator (D7)
- The 2 dimmable lamps are connected to channel 7 + 8 of the dimming actuator (D0)
- Its presence detector is connected to channel 4 of the movement/presence detector (D10)
- The window contact is connected to channel 2 of the binary input module (D11)