D2: Blinds/Shutter Actuator

• Order number: BS.tp
• Medium type: TP
• Supported load types:
  • Blinds
  • Shutter
• Blinds/shutter position are stored at 'power down'
  • Exception: after setting the device to its ex-factory state
• 8 channels
• 8 objects per channel
  1. Move
  2. Step/Stop
  3. Position
  4. Angle
     • Only for blinds
     • 2 variants: 1-byte or 2-byte
  5. Info Position
     • Feedback object, i.e. it sends information to the bus
  6. Angle Position
     • Only for blinds
     • Feedback object, i.e. it sends information to the bus
  7. Frost Alarm
     • Only for shutters
     • Moves the shutters up after the alarm has been triggered (*)
     • The channel (shutters) cannot not be controlled via the other objects as long the alarm is triggered
  8. Rain Alarm
     • Only for shutter
     • Moves the shutters down after the alarm has been triggered (*)
     • The channel (shutters) cannot not be controlled via the other objects as long the alarm is triggered
  9. Wind Alarm
     • Only for shutter
     • Moves the shutters up after the alarm has been triggered (*)
     • The channel (shutters) cannot not be controlled via the other objects as long the alarm is triggered
  10. Intrusion Alarm
      • Only for blinds
      • While the alarm is triggered: moves the blinds between two fixed positions (*)
      • The channel (blinds) cannot not be controlled via the other objects as long the alarm is triggered
  11. Fire Alarm
      • Only for blinds
      • Moves the blinds up after the alarm has been triggered (*)
      • The channel (blinds) cannot not be controlled via the other objects as long the alarm is triggered
• Triggered alarms are indicated in the channel labels, as:
  • 'F' in case of fire (blinds)
  • 'I' in case of intrusion (blinds)
  • 'W' in case of wind (shutter)
  • 'R' in case of rain (shutter)
  • 'F': in case of frost (shutter)
• Alarm priority: defines the priority of the alarms per channel
  
  • Shutter: frost > wind > rain or frost > rain > wind
  • For blinds this is fixed to fire > intrusion and therefore not available as parameter

(*) : this depends on the alarm priority, see parameter dialog in the device