D10: Movement/Presence Detector – KNX Association

Devices

D10: Movement/Presence Detector

Christophe Parthoens

Order number: MP.tp
Medium type: TP
8 channels
Up to 4 objects per channel
1. Movement Detected
2. Enable/Disable Movement Detection
3. Presence Detected
4. Enable/Disable Presence Detection
Parameters
- Movement detection:
  - Send in case of: no detection -> detection or vice versa or both transition
  - Repeat every 5 seconds: yes/no
  - Output on the bus: detection = 1 or detection = 0
- Presence detection:
  - Send in case of: no detection -> detection or vice versa or both transition
  - Repeat every 5 seconds: yes/no
  - Output on the bus: detection = 1 or detection = 0
UI
- Movement detection:
  - '(M)' : no movement detected
  - 'M' : movement detected
- Presence detection:
  - '(P)' : no presence detected
  - 'P' : presence detected