Presence detector gira 2220 00, B.E.G. 93392/93523 not working under ets6(6.1.1)

Hi,

I'm expiriencing problems with presence detectors (gira 2220 00, B.E.G. 93392/93523) in ets6 version 6.1.1. 

5 years ago i programmed B.E.G. 93392 presence detector in ets5 without any problem. In Recent weeks i wanted to reprogram this sensor en also add a new B.E.G 93523 sensor and Gira 2220 sensor to experiment in ets6(6.1.1). 

Problem programming BEG sensors (93392,93523):
In ets6, while activating the program button (indicated by a red led lighting up) when downloading the adress ets keeps searching for a device with program button activated. I cant connect to these sensors in any way in ets6.

Problem with gira 2220 00 sensor:
the device gets recognized when activating the program button to adress the sensor. When downloading the apllication into the device the doanload stops with an error

 Also a blue led in the sensor start flashing. Searching Gira's documentation following is mentioned: The device flashes the status LED slowly (approx. 0.75 Hz) to indicate that a wrong application has been programmed into its memory by the ETS. Applications are nonexecutable even if they are intended for use in the ETS product database but cannot be combined with the selected device hardware. It should generally be ensured that the device hardware used matches the ETS configured device. The status LED flashes slowly even if the application program has been removed by the ETS. In both cases, the device is without function.

I downloaded the latest knx product databases before starting the programming.

My other knx products (Berker tastsensors, mdt schaltaktors are working and programming flawless.

Does anybody know whats going wrong. Any experience?

Best regards,

Bert