Deprecated
Released 24 April 2019, build 743
New features
User Interface & Functionality
N/A
ETS SDK
N/A
Improvements
User Interface & Functionality
KNX Secure
Device loading via Routing..
Set password for secure tunneling slots when Secure Tunneling is activated
ETS behavior when 'Direct IP' connection cannot be established.
Dialog for adding required device certificate before downloading and update to the new 'Add Device Certificate' dialog wherever needed.
Download of master-reset device displays a warning even if 'Direct IP' connection setting is enabled.
Secure device replacement with already configured device.
Defer restart until after both the security configuration and the IP configuration are applied. Saves one restart.
Request for a device certificate when the 'Last Loaded ToolKey' is known, but did not work.
Telegrams containing secrets are not displayed in the monitor.
Telegrams containing secrets are not stored in plain when saving monitor trace as XML.
User experience
Further optimization of 'Optimized Prop Download'.
Transliterate the device's friendly name if not represented in ISO-8859-1.
Display Secured Service Families in Device Information.
ETS App Device Compare works with a device in security mode.
Bus monitor added a new 'Security' column.
Rename the 'Topology' to 'Topology Backbone'.
Further optimization of the use of device's the KNX Serial Number.
Bug fixes
User Interface & Functionality
KNX Secure
Deactivation of security did not properly deactivate all the secure functions (Tunneling, Routing, Device Management).
ETS expected Secure Routing disabled after switching 'Secure commissioning' from 'Enabled' to 'Disabled'.
Downloading an IP Router over own tunneling server breaks if the IP configuration changes during download.
Clear secured service families before disabling security mode.
Bus monitor does not decrypt secure telegrams.
'Continue plain' when requested to add a device certificate cancels the download.
Bus monitor: all frames were displayed as 'Extended'.
Wrong password for 'Direct IP' connection.
Consideration of access policies when downloading plain.
Functionality
Double Group Object entries (any affected projects are not repaired upon import and shall be repaired by the KNX support team).
'Unlink' connector description should contain the Individual Address of parent device.
Projects < schema version 1.4 cannot be checked out from archive.
Access denied to knxmaster.xml.
Error when creating reports.
Dynamic Group Object texts are not persisted anymore.
Incorrect determination of maximum routing APDU length if router is in security mode.
Cannot change float min/max values via spinning buttons.
Project import error.
The search for newer versions of the knx_interfaces.xml file.
Error when downloading a modular Application Program.
Transaction error when adding building parts.
Acknowledges are not persisted correctly.
Problem with rare devices containing uncommon special characters in internal channel description (any old affected projects are not repaired upon import and shall be repaired by the KNX support team)
'Transfer Parameters and Flags' operation deletes DeviceBinaryData of master device.
'Transfer Parameters and Flags' errors.
Download of MAP-based devices that contain submodules.
ETS SDK
- N/A