Like any other KNX device, bus interfaces must have a unique PA/IA, also called a local PA/IA.
Physical Address: |
Displays the PA/IA or allows the PA/IA to be edited. |
Domain Address: |
Only for PL and RF. For details. |
Is there a repeater? |
Only for PL. Every participant in a PL Line must know whether there is a repeater in the PL Line. An entry must be made here manually as to whether this is the case. |
Notes
•Connections can also be switched/changed via the Status Bar.
•In order to avoid communication problems with devices outside of the local bus line, the PA/IA of the local interface needs to be configured properly. So please make sure to set the PA/IA according to the topology; i.e. set the local PA/IA within the range of the connected line!