HVAC - single room

For the actual functionality: see the HVAC concept article.

This training board allows to 'play' with HVAC functions specifically for room1, it contains the following controls:

• The KliX (D4) push buttons (2 x 8)
• The Setpoint Manager (D15)
• The Heat Controller (D16)
• The Heat Exchanger (D17): indicating its heat/cool status: 'heat', 'cool' or 'deadband'
• Channel 1 of the Valve Actuator (D6): indicating the valve status of Room1
• The temperature sensor of the Weather Module (D12)
• The wind speed sensor of the Weather Module (D12)
• The brightness sensor of the Weather Module (D12)
• The rain quantity sensor of the Weather Module (D12)
• The movement detectors (8) connected to the Movement & Presence Detector (D10)
• The presence detectors (8) connected to the Movement & Presence Detector (D10)
• The reed switches (8) from the Binary Input module (D11)

In this training board also the following devices can be used, i.e. they can influence the building functions within this view, but the actual device is not visible:

• The Logic Module (D14)
• The Scene Module (D13)