HVAC - multiple room

For the actual functionality: see the HVAC concept article and the Multiple Room concept article.

This training board allows to 'play' with HVAC functions for room21, room22, room23 and room24 simultaneously, it contains the following controls:

• RoomControls for room21 buttons (2 x 8)
• RoomControls for room22 buttons (2 x 8)
• RoomControls for room23 buttons (2 x 8)
• RoomControls for room24 buttons (2 x 8)
• The Setpoint Manager (D15)
• The Heat Controller (D16)
• The Heat Exchanger (D17): indicating its heat/cool status: 'heat', 'cool' or 'deadband'
• Channel 2 of the Valve Actuator (D6): indicating the valve status of Room21
• Channel 3 of the Valve Actuator (D6): indicating the valve status of Room22
• Channel 4 of the Valve Actuator (D6): indicating the valve status of Room23
• Channel 5 of the Valve Actuator (D6): indicating the valve status of Room24
• The temperature sensor of the Weather Module (D12)
• The wind speed sensor of the Weather Module (D12)
• The brightness sensor of the Weather Module (D12)
• The rain quantity sensor of the Weather Module (D12)
• 4 Presence detectors connected to the Movement & Presence Detector (D10)
  • Room21 : channel 1
  • Room22 : channel 2
  • Room23 : channel 3
  • Room24 : channel 4
• 4 Contact switches from the Binary Input module (D11)
  • Room21 : channel 1
  • Room22 : channel 2
  • Room23 : channel 3
  • Room24 : channel 4

In this training board also the following devices can be used, i.e. they can influence the building functions within this view, but the actual device is not visible:

• The Logic Module (D14)
• The Scene Module (D13)