List view

The working panels (Buildings, Topology, etc.) have a List view on the right-hand side.

You can enable or disable the column in the list view as shown below.

Also, You can find all panels list view elements/columns and their descriptions here: Buildings panel  (detailed), Topology panel (Detailed), Catalog panel (Detailed), Group Address panel (detailed)

Tabs

• A List view has several levels (or tabs) which can be selected at the upper left edge.
• All the tabs except the 'Parameters' and 'DCA' display the number of elements that they contain. In case there are elements selected a tab, then the tab displays the number of selected elements in proportion of the total elements (e.g. 2/6, which means that 2 out of 6 devices are selected).
  • The display of the selection remains if the tab changes.
• Depending on the selection made in the Tree view, the names of the sub-elements or assigned elements will be displayed in the List view (e.g. Building Parts, ... / Areas, Lines, ... / Main Groups ...). A List view can also be customized, for example, the order of the columns.

The first tab level always has a 'content-related' name (e.g. group objects when a device is selected in the Tree view). It is possible to switch between functions using the additional tabs 2...n (see picture above). This is e.g. necessary to set the device parameters on the Parameters tab, for example.

Functions

• You can edit individual (editable) elements directly in the List view either by pressing F2 (for an editable text, e.g. the group object description in the topology) or by clicking directly on the editable field with the mouse. A drop-down field with available values will open, e.g. the group object Priority in the topology.
• You can browse through the elements or levels conveniently by double-clicking the icons (and only on these). The icons are generally located in the first column. Example for the Topology root element:

Area	Line	Segment	Device	Group object	Group address